sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems NEC Telephones & Systems nec elite 48

Can I get an electra elite 48 to ring through the paging system? How?

[This message has been edited by mike snyder (edited February 22, 2005).]

you'll need an ecr card 1st thing and a empty slot to put it in.

next you'll need a small pdf file telling how to connect it up.

thanks chrislebeck. Should I order it from this web site? Do you know the part #? I dont think I have to program that in features mode but I'm not sure.I also have 1 phone that will not let me page.Do I have to buy a manual,or could you give me a hint what feature code it is? thanks again

[This message has been edited by mike snyder (edited February 23, 2005).]

not sure if they offer it here but you can get it off of the net somewhere. ebay sometimes has them.

the part you'll need is an ecr card for an elite phone system

you will have to program it in program 7-1
============================================

to page from any phone pickup the handset or press speaker 59 (to page all internal & external)

or if you needed specific page groups try

51
52
53
54
55