|
|
Joined: Jun 2004
Posts: 58
Member
|
OP
Member
Joined: Jun 2004
Posts: 58 |
I've got an MIFM card for two reasons,
A) Caller ID memory scroll
B) Ability to program through a PC Based App (CoSessions?)
I've checked block 7-1 and it shows the MIFM card installed in Slot 2(I guess it did this automatically). I've programmed a Line Key in block 4-12.
When pressing the scroll key, It doesn't seem to do anything.
I'm going to try to restart the PBX.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2005
Posts: 306
Member
|
|
Member
Joined: Mar 2005
Posts: 306 |
Is there a kmm chip installed? You need it for cid scrolling.
|
|
|
|
|
Joined: Jun 2004
Posts: 77
Member
|
|
Member
Joined: Jun 2004
Posts: 77 |
Like Tom said, 1. CID scrolling requires a MIFM card, with KMM-U chip to work. If your MIFM card is older than version 5.00, you will only get 10 last numbers, while v5.00 will give you 50 per station. 2. MIFM card will allow you to program the system, using SAT software, not co-session (which is for the voice mail stuff.) IMO, it's way easier doing it with the handset, except if you are setting up a whole new system, in which case, SAT might be better. Good luck. <font face="Verdana, Arial" size="2">Originally posted by looknow12:
I've got an MIFM card for two reasons,
A) Caller ID memory scroll
B) Ability to program through a PC Based App (CoSessions?)
I've checked block 7-1 and it shows the MIFM card installed in Slot 2(I guess it did this automatically). I've programmed a Line Key in block 4-12.
When pressing the scroll key, It doesn't seem to do anything.
I'm going to try to restart the PBX.</font>
|
|
|
|
|
Joined: Jun 2004
Posts: 58
Member
|
|
OP
Member
Joined: Jun 2004
Posts: 58 |
There are two slots where proms can be installed on the board. They are both empty. Can anyone tell me the part number of the chip I need?
|
|
|
|
|
Joined: Nov 2003
Posts: 1,313
Member
|
|
Member
Joined: Nov 2003
Posts: 1,313 |
just ask your dealer for a kmm chip. he'll know what it is.
|
|
|
|
|
Joined: Apr 2005
Posts: 6
Member
|
|
Member
Joined: Apr 2005
Posts: 6 |
Does anyone have the SAT software they can send me? Thanks.
|
|
|
|
Forums84
Topics94,294
Posts638,834
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
162
guests, and
361
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
