sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems IPK Telephone mode programming

on an IPK 64 going into program mode (*************)
Telephone mode is LK4
I checked every button on the Dterm 80 set on port 01 I was programming, and the only modes I got on the display was, Assignment mode, Special mode,Copy Mode.
Where is telephone mode?

Thanks

{Please do not post passwords or programming entrys on a public forum}

First, please don't post programming access codes in the open forum. There's a policy that passwords and programming access codes should not be posted, so that hackers / phreaks can't use this board for malicious purposes.

This was a Dterm 80? Okay, that should work by default on an IPK. What happened when you pressed LK4?

Is it possible tht the set on port 01 has a bad LK4? Also, if this is a 16 button set, try pressing LK12 instead of LK4.

Sorry about the password thing. I tried pressing all the buttons but that's what I got.
I can go into IPK SAT remotely.
All I wanna do is port 02 make it ext 101.
And upload that change only.
I don't want to upload all.
I select telephone mode in the upload drop down menu then I have to enter what memory block (001 to 120) I'm not sure what to enter here.
Can you help me?


thanks

I have uploaded the station extension assignment to port 02, made it 101 from it's default 000.
Now when I call in and Auto attendant answers.
I select ext.101 it does'nt say "hold on while I try that extension" and then ring 4-5 times before going to voicemail.
It just say's the person you are trying to reach is unavailable please leave a message.
How do I get it to ring first?

thanks

ext 101 needs to be forwarded to the vm. go to it. speaker 43 then the vm pilot ext number.


also ext 101 needs a mailbox in the vm in order for the vm to transfer the call.