Two PBX (#1 & #2) are connected via CCIS.
PBX #1 and PBX #2 are connected with C.O. via ISDN PRI.
Outgoing Access Code "9" (LCR)was programmed for PBX #1.
Outgoing Access Code "0" (LCR) was programmed for PBX #2.
Outgoing Access Code "0" (LCR) was programmed for PBX #1 through PBX #2.
Feature DISA was programmed for PBX #1.
CM3019>xxx:2999,CM3034>xxx:00, CM5005>00:200 was assigned for PRI trunks PBX #1.
I call from C.O. #A to DISA number, input password, dial 9 and local number B. Side B isn't received any CLIP.
If after password I dial 0 and local number B, side B recive CLIP A (outgoing call through CCIS and PBX #2).
Is it possible transmit incoming CLIP through self PRI link for DISA call?
Is it possible send PRI trunk CLIP (CM3019> ...) through self PRI link for outgoing DISA call ?
