Station Speed Dial — Dial Access
To store a Station Speed Dialing number (display telephones only):
1. Press the Speaker key.
2. Dial 755.
3. Dial the Station Speed Dial buffer number to be programmed (0~9).
1 = Station Speed Dial buffer 1
2 = Station Speed Dial buffer 2
Etc....
0 = Station Speed Dial buffer 10
4. Dial the Access Code (e.g., 9) - if required.
5. Dial telephone number you want to store (up to 24 digits).
Note: Valid entries are 0~9, # and *. To enter a pause, press MIC. To
store a Flash, press Recall.
6. Press Hold.
7. Enter the name associated with the Speed Dialing number
(display telephones only):
Key for Entering Names
Use this
keypad
digit . . .
When you want to. . .
1 Enter characters 1 and other charecters.
2 Enter characters A-C, a-c, 2
3 Enter characters D-F, d-f, 3
4 Enter characters G-I, g-i, 4
5 Enter characters J-L, j-l, 5
6 Enter characters M-O, m-o, 6
7 Enter characters P-S, p-s, 7
8 Enter characters T-V, t-v, 8
9 Enter characters W-Z, w-z, 9
0 Enter characters 0 and other punctuation.
8. Press Hold.
9. Press the Speaker key to hang up.
DJ