Front Desk Terminal Printer Problem

Print Thread

Rate Thread

Front Desk Terminal Printer Problem #231543 08/23/06 02:16 PM
Joined: Sep 2005 Posts: 53 S.E.A polytone Member
polytone Member Joined: Sep 2005 Posts: 53 S.E.A	The problem is, PMS interface is down. I off and on the AP00 card, the Log printer is print out the buffer data. When the PMS start to interface with AP00, the Log printer is stop, and the PMS also not reply. Finally, i use CMD D101>0000:ccc to clear the data in AP00, and reprogram PMS and hotel printer, now the PMS was working fine, only the Log printer is show, "date" "time" ** AP00 START ** "MP version" , and " SORT COMPLETE " , after make an outgoing call, PMS receive the SMDR, but NOTHING in Log Printer. Help Me Please...........

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Front Desk Terminal Printer Problem #231544 08/23/06 05:46 PM
Joined: Jul 2001 Posts: 1,985 Chetco Effect DrPbx Moderator-Mitel, NEC, Vodavi
DrPbx Moderator-Mitel, NEC, Vodavi Joined: Jul 2001 Posts: 1,985 Chetco Effect	There is a difference between PMS Interface & SMDR Output to Call Accounting. Which are you working with?

Re: Front Desk Terminal Printer Problem #231545 08/24/06 03:10 AM
Joined: Sep 2005 Posts: 53 S.E.A polytone Member
polytone Member Joined: Sep 2005 Posts: 53 S.E.A	AP00 port 0 assign for PMS, port 3 assign for printer 0 .

Moderated by ttech

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums TDM Business Telephone Systems NEC Telephones & Systems Front Desk Terminal Printer Problem