|
|
Joined: Jan 2007
Posts: 57
Member
|
OP
Member
Joined: Jan 2007
Posts: 57 |
- How hard is it to install a color ID card for a Electra Elite 48 with 4 phone lines?
- Could it be programmed from a dispaly phone? Or is another software needed?
Electra Elite 48 with Elitemail FMS/VMS (2 Port).
SP013, Ver. 3.11
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2005
Posts: 170
Member
|
|
Member
Joined: Dec 2005
Posts: 170 |
you can install the card from the phone, but if you want to scroll you will need an mifm card with a kmm chip. you have to go into mb 7-01 and install the card in the slot. mb 4-12 is where you program the buttons for the extensions. mb 4-01,02 is where you program ringing.
|
|
|
|
|
Joined: Dec 2005
Posts: 170
Member
|
|
Member
Joined: Dec 2005
Posts: 170 |
what kind of card is it coib-4 or coid-8?
|
|
|
|
|
Joined: Jan 2007
Posts: 57
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 57 |
Originally posted by bigc3310:
what kind of card is it coib-4 or coid-8? Haven't purchased it yet. Can you make a recommendation for 4 CO lines?
Electra Elite 48 with Elitemail FMS/VMS (2 Port).
SP013, Ver. 3.11
|
|
|
|
|
Joined: Jan 2007
Posts: 57
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 57 |
Originally posted by bigc3310:
you can install the card from the phone, but if you want to scroll you will need an mifm card with a kmm chip. If I need the scrolling feature also, I would need to purchase 2 cards correct? A mifm card with a kmm chip and a coid-4 or 8?
Electra Elite 48 with Elitemail FMS/VMS (2 Port).
SP013, Ver. 3.11
|
|
|
|
|
Joined: Dec 2005
Posts: 170
Member
|
|
Member
Joined: Dec 2005
Posts: 170 |
yes.
coib4 is for 4 lines but if you plan on expanding then you will need the coid-8
|
|
|
|
|
Joined: Jul 2006
Posts: 731
Member
|
|
Member
Joined: Jul 2006
Posts: 731 |
You will also have to enable the feature in system programming...what software ver. is the CPU?
|
|
|
|
|
Joined: Jan 2007
Posts: 57
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 57 |
Electra Elite 48 with Elitemail FMS/VMS (2 Port).
SP013, Ver. 3.11
|
|
|
|
|
Joined: Jul 2006
Posts: 731
Member
|
|
Member
Joined: Jul 2006
Posts: 731 |
Memory blocks 1-1-78 to assign up to 15 ports to recieve CID, 1-8-08 page 4 line key 3 on & page 5 line key 7 on.
The station must be assigned to ring in mem-block 4-01/02 to display CID. All transferred calls will see CID.
The system will not store any CID without a MIF-M & a KMM chip for it, but will only store 10 calls for that station...not a good feature level...
Regarding the Elitemail, you will have to log on with cosession software to add CID to the switch integration line on the switch set-up page.
Make sure you get a COIB & not a COID! The Elite 48 had a design flaw where if there were "transient" voltages present on the CO lines, it would go out the system ground & take the CID data with it! The COIB was NEC's solution as long as the voltages were'nt too high!
|
|
|
|
|
Joined: Feb 2007
Posts: 3
Member
|
|
Member
Joined: Feb 2007
Posts: 3 |
Originally posted by IPKII:
Memory blocks 1-1-78 to assign up to 15 ports to recieve CID, 1-8-08 page 4 line key 3 on & page 5 line key 7 on.
The station must be assigned to ring in mem-block 4-01/02 to display CID. All transferred calls will see CID.
The system will not store any CID without a MIF-M & a KMM chip for it, but will only store 10 calls for that station...not a good feature level... How would I tell if I have the MIF-M & a KMM chip? Also is there a part # for these? I have found the COIB4 on ebay already.
|
|
|
|
Forums84
Topics94,296
Posts638,846
Members49,769
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (C5Z, justbill),
175
guests, and
299
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
