|
|
|
|
Joined: May 2005
Posts: 39
Member
|
|
Member
Joined: May 2005
Posts: 39 |
I would appreciate some help on installing a SPE(M)-U10 ETU in an IPK. I just need to connect to the SPE via the Ethernet connection using SAT and Co-Sessions. The voice mail card is a VMS4. I have the SPE installed and configured. I can connect with SAT but not Co-Sessions. Frankly, I am confused regarding the use of the virtual serial ports and the SPE software. Which COM port do I need to use on the SPE to the VMS. The SPE ports are labeled A through D but the software refers to COM 4 and COM 53. I set the serial port to 19,200,8,n,1 for the VMS connection.
Any help/guidance would be appreciated.
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
You will need a null modem cable to connect the SPE to the VMS.
|
|
|
|
|
Joined: May 2005
Posts: 39
Member
|
|
Member
Joined: May 2005
Posts: 39 |
I currently have the serial cable that came with the
SPE card plugged into COM D on the SPE and the VMS.
|
|
|
|
|
Joined: May 2005
Posts: 39
Member
|
|
Member
Joined: May 2005
Posts: 39 |
I worked it out on my own. Its a rather convoluted setup and the NEC manual isn't that helpful. Apparently there is not a lot of experience with the SPE ETU on the forum.
|
|
|
|
Forums84
Topics94,512
Posts639,933
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
118
guests, and
37
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
