Originally posted by IPKII:
[b] Here's a trick I learned...
First of all, I only use SAT as a database back-up tool. That being said, the CPU seems to like being up-loaded in a "dumb" state.
With a de-faulted CPU, power up with just the MIF-M, connect & upload your database, then slot your cards one at a time, just an IPK II.
Let's try this again..my 1st reply did'nt post.
Yes, I do a hardware upload before I slot my cards.
Yes, I do a hardware upload before I slot my cards.
This seems to alleviate database "bugs".
I'm not with you here as the Elite only scans for cards on a default startup. Once the CPU is running you have to do a H/W reload or use MB 7-1 to load the cards into their slots..
