|
Joined: Aug 2004
Posts: 11
Member
|
Member
Joined: Aug 2004
Posts: 11 |
I have an NEC aspire. I've connected lines 6,7,8 into the system and have programmed station 301 to access these lines directly.
Each line has a button and has direct CO dialtone when pushed.
But how do I get the other stations to work the same way??
The other stations only get line 1 through 5.
I've tried copy 92-01-01 1501 from station 301 to 302 through 306.
Can you help??
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Nov 2001
Posts: 1,640
Moderator-NEC
|
Moderator-NEC
Joined: Nov 2001
Posts: 1,640 |
You can Program the keys under 15-07 as line keys for the other 5 ststions
|
|
|
|
Joined: Jan 2005
Posts: 112
Member
|
Member
Joined: Jan 2005
Posts: 112 |
How are the other stations accessing the other lines, Loop Keys, hitting "9", or line keys? If its line keys 1507 should work not 1501. If its loops or dialing "9" you will have to change the trunk group priority in 1405.
|
|
|
|
Joined: Aug 2004
Posts: 11
Member
|
Member
Joined: Aug 2004
Posts: 11 |
I'm not sure how to get to the other stations.
I've tried 15-07-01 and that is what got station 301 to work with all 8 lines.
When I go to the other stations and begin programming it shows 301 as if I'm still on station 301.
Perhaps what I need to know is how do I tell what station I'm programming.............
I'm not sure how to get 15-01-01 for station 302 etc.
We don't dial a nine to get out these are direct lines. I'll try 1507 rather than 1501.
Thanks for your replys
|
|
|
|
Joined: Aug 2004
Posts: 11
Member
|
Member
Joined: Aug 2004
Posts: 11 |
Also, when I scroll through the stations using 15-07 they appear to all look good, (look the same as station 301) but when you push the button for line 6,7,8 it's NDT.
|
|
|
|
Joined: Nov 2007
Posts: 369
Member
|
Member
Joined: Nov 2007
Posts: 369 |
If you are having difficulty with programming via system program 15-07, try this:
At each phone, press [CALL1], dial 852, press the line key you want to add the CO line to (e.g., line key six for CO 6), dial *01 + 6 (for CO 6), then repeat for each additional line you want to add.
Note: if line Key 6 is already programmed as something else, you will have to clear the button with either [CALL1] 851 + 00, or [CALL1] 852 + 000.
"I didn't do it, and I won't do it again"
|
|
|
|
Joined: Aug 2004
Posts: 11
Member
|
Member
Joined: Aug 2004
Posts: 11 |
Thanks eriway I will try what you've suggested toward the end of the week and let you know how it goes.
|
|
|
|
Joined: Aug 2004
Posts: 11
Member
|
Member
Joined: Aug 2004
Posts: 11 |
That resolved the issue.
Thanks for your help eriway.
Jack
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
433
guests, and
56
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|