|
|
|
|
Joined: Sep 2008
Posts: 7
Member
|
|
Member
Joined: Sep 2008
Posts: 7 |
Hello,
The "T1 Alarm" "0F" code is showing on our 100 extension's NEC Dterm80 LCD screen.
I swear I've seen this before, and it does not appear to be causing any issues, but I'm wondering what this code means because (i.e. does it signal a larger issue?)...
Thanks in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Your T1 is having issues, probably a telco issue.
Swap out the card & then call the T1 provider.
|
|
|
|
|
Joined: Nov 2007
Posts: 369
Member
|
|
Member
Joined: Nov 2007
Posts: 369 |
I think the "OF" indicates "out-of-frame" for the T-1 signal. If you are not having service issues, and want to clear the display, you will have to reset the system cabinet. I generally don't like suggesting this, though, because some of the older Elite cabinets have the VMS voicemail with harddrive, and I have seen that voice mail fail following a customer's reboot.
"I didn't do it, and I won't do it again"
|
|
|
|
|
Joined: Sep 2008
Posts: 7
Member
|
|
Member
Joined: Sep 2008
Posts: 7 |
Update: I was able to clear the "T1 Alarm 0F" code by power cycling one of our cabinets (we have 2 of them linked up, and I believe this was probably some kind of sync issue since I only had to cycle one of the cabinets in order for the code to clear).
Thanks for everyone's input, it is very much appreciated!
|
|
|
|
Forums84
Topics94,569
Posts640,198
Members49,872
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
47
guests, and
79
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
