|
|
|
|
Joined: Jun 2004
Posts: 1,367
Member
|
|
Member
Joined: Jun 2004
Posts: 1,367 |
Actually what is the "type" of PRI being used.
I just had a PRI delivered by SIP and the Adtran would stick a very long delay into it. It was bad with 11 digit dialing and really bad (7-8 seconds) with 7 digit dialing. When there was 7 digits the phone sytem would wait 3 seconds for additional digits. Then the Adtran would wait 5 seconds before sending call. When user dialed 11 digits - phone system would send out immediately and there was still a 5 second delay before call was sent out. Couple that with calling a cell phone that has to be "found" there was sometimes a 12 second delay between last digit dialed and first ringback.
This was on an Aspire and I don't know much about the IPK but the mechanics are fairly close.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Feb 2009
Posts: 13
Member
|
|
Member
Joined: Feb 2009
Posts: 13 |
the pri is from megapath and they put in an adtran. they also said they timed from when i hit the last digit on the phone and said they did not see it for 4 seconds. also they (megapath) had to change it from 23 trunks to 16 due to a quality issue when using compresion (overseas calls were horrible) they are blameing the nec phone system for not handeling the compression. and yes some of the calls take up to 10 seconds to hear ring back.
DO IT RIGHT THE FIRST TIME
|
|
|
|
|
Joined: Feb 2009
Posts: 13
Member
|
|
Member
Joined: Feb 2009
Posts: 13 |
i still have problem with delay
help please
DO IT RIGHT THE FIRST TIME
|
|
|
|
|
Joined: Sep 2008
Posts: 63
Member
|
|
Member
Joined: Sep 2008
Posts: 63 |
Did you chage your programming to reflect the new fraction of the PRI?
All-Tronics Inc. Battle Creek Michigan 1-800-968-7171
|
|
|
|
|
Joined: Feb 2009
Posts: 13
Member
|
|
Member
Joined: Feb 2009
Posts: 13 |
no. they had delay problem before they even changed the number of trunks. and the carrier said that they did not limit which trks but how may can be used.
DO IT RIGHT THE FIRST TIME
|
|
|
|
|
Joined: Jul 2006
Posts: 731
Member
|
|
Member
Joined: Jul 2006
Posts: 731 |
If the ARS is set up correctly with memory block 1-14-07 set for max digits, it should go right out. As for the "compression" issue Megapath referred to, that is a load of crap. Verify your ARS & then get them out there with a T-1 test set.
|
|
|
|
|
Joined: Jul 2006
Posts: 731
Member
|
|
Member
Joined: Jul 2006
Posts: 731 |
FYI, I just googled Megapath, they are IP based.
|
|
|
|
|
Joined: Feb 2009
Posts: 13
Member
|
|
Member
Joined: Feb 2009
Posts: 13 |
i don't have a memory block after 1-14-06
DO IT RIGHT THE FIRST TIME
|
|
|
|
|
Joined: Jul 2006
Posts: 731
Member
|
|
Member
Joined: Jul 2006
Posts: 731 |
I just researched this a little deeper. That CPU needs to be at version 9500 to get memory block 1-14-07.
|
|
|
|
|
Joined: Feb 2009
Posts: 13
Member
|
|
Member
Joined: Feb 2009
Posts: 13 |
so with ver. 4.5 the customer has to suffer? unless he would like to pay for an upgrade besides the money he spent on the prt card.
DO IT RIGHT THE FIRST TIME
|
|
|
|
Forums84
Topics94,524
Posts640,007
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
![[Linked Image from i26.servimg.com]](http://i26.servimg.com/u/f26/14/56/80/78/logo12.png){kind=logo}
