atcomsystems.ca/forum Forums TDM Business Telephone Systems NEC Telephones & Systems NEC Electra Professional 120/Level II

We need to change the intercom/paging code, students know it now and play on the phone at various times of day. Can you tell me how to do it? The last office manager didn't leave many instructions for phone. I have admin rights on my phone.
Thanks

PM sent

I have the same NEC Electra Professional Level II and need to block stations from dialing cell phones. Here in Mexico cell phones are reached using 044 before the cell number. Could you help me too.. ? I'm the admin of the sistem but haven't found what are the settings I have to change..

Thanks !!

This is from the Elite Manual but should work...

Default Assignments
All stations are assigned to Code Restriction Class 00 for both Day
and Night Mode to allow free dialing.
Code Restriction Classes are set up with the following restrictions
to provide the most common Code Restriction requirements and
simplify Code Restriction programming.
Class 01: Deny: 0 and 1 + calls
Class 02: Deny: 0 and 1 + calls Allow:1-800, 888, 877 calls
Class 03: Deny: 0, 1 +, and 976 calls Allow:1-800, 888, 877 calls
Class 04: Deny: 1 + calls Allow:1-800, 888, 877 calls
Class 05~14: Allow: 911 calls only
All OCC calls are denied for Code Restriction Classes 01~14.
The following related Memory Blocks are used when assigning
Code Restriction.

Trunk to Tenant Assignment......................................................2-01
Trunk-to-Trunk Group Assignment ............................................3-03
Trunk Type Selection.................................................................3-91
PBX/CTX Access Code Assignment I....................................1-1-24
PBX/CTX Access Code Assignment II...................................1-1-25
OCC Table Assignment..........................................................1-1-67
OCC Table to Trunk Group Assignment....................................5-03
8-Digit Matching Table to OCC Table Assignment .................1-1-68
8-Digit Matching Table to Normal Dial Assignment ................1-1-66
8-Digit Matching Table to Trunk Group Assignment..................5-02
8-Digit Matching Table Assignment........................................1-1-60
8-Digit Matching Table to Class Assignment..........................1-1-61
Code Restriction Class Allow/Deny Assignment....................1-1-65
System Speed Dial Restriction by Tenant ..............................1-1-18
System Speed Dial Override by Class Selection ...................1-1-62
Tie Line Code Restriction Assignment ...................................1-1-69
Code Restriction Class Assignment When Lockout is Set.....1-1-70
CO Feature Codes Service for Code Restriction ...................1-1-82
Trunk Digit Restriction...............................................................4-32
Code Restriction Class Assignment (Day Mode) ......................4-07
Code Restriction Class Assignment (Night Mode) ....................4-08
Telephone to Tenant Assignment ..............................................4-09
Station To Class of Service Feature Assignment ......................4-17

Thanks !! I have set 4-07 & 4-08 to class "04" and then I set 4-32 to restrict 13 digits (cell calls here use 13 digits). Long distances pass ok because are 12 digits and cell calls are dropped. Now the problem is that the class 04 is blocking the 106XXXX local numbers just because they begin with "1". is there some way to disable the "1+ calls" rule in class 04.. ?

Thanks in advance.

I'm trying to modify the Class04 using 1-1-61, will continue tomorrow.