|
|
Joined: Jul 2004
Posts: 279
Member
|
OP
Member
Joined: Jul 2004
Posts: 279 |
I though you could program names for stations on ext 300 but could not. So I looked all through the manual and just could not believe I couldn’t program a simple name change. I have change names before but have been awhile. (Love that DSX pc programming.)
If you say you don't know you will get more respect.
|
|
|
|
|
Joined: Jan 2004
Posts: 6,648
RIP Moderator-Nisuko-Tie, General
|
|
RIP Moderator-Nisuko-Tie, General
Joined: Jan 2004
Posts: 6,648 |
pg 139 , Multi button phone feature Handbook To program a name for a co-worker’s extension:
You must have Access Level 4 or 5 to do this.
1. At a 22- or 34-Button Display Telephone:
Press + + + .
At a Super Display Telephone:
Press + .
2. When you see EXT:3xx, enter the number of the extension
you want to program + HOLD.
Skip
------------------------------------
Serving SW and West central Fl since 1984
|
|
|
|
|
Joined: Nov 2007
Posts: 369
Member
|
|
Member
Joined: Nov 2007
Posts: 369 |
Name programming must be turned on in "Class of Service". Typically, out of the box, station 300 has the option to do this.
At 300: Press the PGM softkey, press More twice, then "Name".
"I didn't do it, and I won't do it again"
|
|
|
|
Forums84
Topics93,881
Posts637,008
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
