|
|
|
|
Joined: Mar 2011
Posts: 11
Member
|
OP
Member
Joined: Mar 2011
Posts: 11 |
I will be programming QSIG on a SV8300 tommorrow to connect to a Nortel System in Perth. The customer advise that irrespective of the number they dial which is 4 digit extension to Perth or Australian full National numbers to use the Tie Line as 1st option and 2nd option to ISDN.How would you program the full Australian numbers listed below on the LCR so it can use the Tie since. CMD 8A4xxx>yyy(8 Digit max):0030
0061 8 9281 9000 – 9999
0061 8 9324 7900 – 7999
0061 7 3858 7000 – 7099
0061 7 3858 7400 – 7599
0061 7 3720 4400 – 4499
Last 4 Digit will be the extension number to Perth and Brisbane.
Thanks
Joe
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2010
Posts: 16
Member
|
|
Member
Joined: Dec 2010
Posts: 16 |
Hi
1. What is the line access code for tie line and ISDN.
2. Through tie line just 4 digit dialing is enough
3. Through ISDN you need to dial full digits.
4. For example if you configure 9 as closed numbering plan length 4 digits, call can go through tie line, during route advance the same call cannot go through ISDN.
5. I think you have to give them two access codes 9 and 0 for tie and ISDN respectively.
|
|
|
|
Forums84
Topics94,282
Posts638,763
Members49,764
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
118
guests, and
192
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
