|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
We're using speed dial to access paging but it takes 3 seconds after you dial the code before you hear the page tone. Do you know how to speed this up? Is there some kind of timer involved?
Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2010
Posts: 16
Member
|
|
Member
Joined: Dec 2010
Posts: 16 |
Usually paging equipment will be connected to CO port and it's an access code to fetch CO port and it is immediate.
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
It's an analog extension connected to a co port on the trunk card. I can manually access it through direct trunk access and it cuts straight through, but when it's accessed through speed dial there is a 3 second delay.
|
|
|
|
|
Joined: Dec 2010
Posts: 16
Member
|
|
Member
Joined: Dec 2010
Posts: 16 |
How are you connecting amplifier to PBX?
|
|
|
|
|
Joined: Aug 2005
Posts: 560
Member
|
|
Member
Joined: Aug 2005
Posts: 560 |
Is there a character you can add to the end of the speed dial number to tell the system you are done dialing? I am guessing the system is waiting to see if there are more digits to be entered, hence the delay......
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
That's what I'm thinking, probably "#". Will try.
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
Adding "#" didn't help. Could it be the inter-digit timer? If so, what command?
|
|
|
|
|
Joined: May 2005
Posts: 1,006
Member
|
|
Member
Joined: May 2005
Posts: 1,006 |
Still 3 second pause, which is defined by NEC as the timer for *, or P. *or P Not in dial string for speed dial. ?
|
|
|
|
|
Joined: Feb 2005
Posts: 600 Likes: 4
Member
|
|
Member
Joined: Feb 2005
Posts: 600 Likes: 4 |
I believe you are going down the wrong path with this, as if it were these timers, you would have the same problem when direct accessing the system. I believe the system may be detecting dial tone or simply pausing to allow dial tone to be presented! What is stored in the speed dial?
|
|
|
|
Forums84
Topics94,543
Posts640,074
Members49,857
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
145
guests, and
27
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
