|
|
Joined: Nov 2006
Posts: 179
Member
|
|
Member
Joined: Nov 2006
Posts: 179 |
Can someone tell me if it is possible to use a loop start trunk port on an SV8300 to access a Bogen PCM TIM page controller?
I have it set up right now to dial 781 which accesses loop start port 10. I do get the beeps from the Bogen and am able to make pages to any zone.
The problem is that I get a constant clicking from the Bogen after I make pages. If I disconnect the RJ-11 from the system the clicking goes away.
I can make pages with my butt-set and it works just fine.
Any ideas? Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
Sounds like the Bogen is not seeing disconnect from the SV8300. I'd check the settings on the loop-start.
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Did you set 3028 for the trunk & 3508 for the TG?
|
|
|
|
|
Joined: Nov 2006
Posts: 179
Member
|
|
Member
Joined: Nov 2006
Posts: 179 |
Just want to verify. If I set the zone for paging in 3028 will it still allow a user to enter a zone on the Bogen? Since I am using zones, would I set it up as a 3-Radio Paging, non delay answer?
I assume that I would then have 3508 set to a 3 correct. Thanks!
|
|
|
|
|
Joined: Nov 2006
Posts: 179
Member
|
|
Member
Joined: Nov 2006
Posts: 179 |
Can someone answer this question? My tech support tells me that the SV8300 is not able to interface to a Bogen PCMTIM page controller. He said that the Bogen sends to high of voltage. Is this true? I have never had a problem connecting any system to the Bogen PCMTIM. If I am able can someone tell me the settings in the commands needed to interface the Bogen?
Thanks
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
|
|
|
|
|
Joined: Nov 2006
Posts: 179
Member
|
|
Member
Joined: Nov 2006
Posts: 179 |
Yes, The pages will work, but I get a continous clicking on the PCMTIM. I am curious if I need to change a setting on the Loop Start trunk. I am new to the SV8300 and am not to familiar with it yet.
|
|
|
|
|
Joined: May 2002
Posts: 17,751 Likes: 38
Member
|
|
Member
Joined: May 2002
Posts: 17,751 Likes: 38 |
According to the manual for the Bogen pcmtim the default timer is 30 seconds, that's a long time for a page. I'd guess your average page is somewhere in the 10 second neighborhood. So since it's not releasing set it to disconnect sooner.
It also states that it's polarity sensitive. Also check to make sure you have the dip switches set correctly.
Retired phone dude
|
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
You need to read a command manual. I will not hold your hand. Your 3508 is incorrect.
|
|
|
|
Forums84
Topics94,564
Posts640,173
Members49,868
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
13
guests, and
89
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
