|
Joined: Nov 2008
Posts: 1
Member
|
OP
Member
Joined: Nov 2008
Posts: 1 |
We have a Comdial PBX system and a KeyVoice VMail system. One of the routing boxes in the Vmail system routes some of its options incorrectly.
The routing box contains 8 transfer entries. All entries ring the requested station when the transfer is made. Five of the entries transfer to voicemail if the party does not answer. Three of them route to our switchboard (operator) instead of transfering to voicemail if the party does not answer.
The routing box appears to be set up the same as others that work. I tried re-creating the routing box with the same results.
In VMMI, the stations are set up identically (with the obvious exceptions of fields that need to be unique).
I have checked the trans.txt and can find no entries for these extensions.
Directly transfering to the extensions (not through the routing box) works correctly.
In voicemail viewer I can see the incorrect transfers happening and they appear in the voicemail log.
Here are the results in the voicemail log:
Works Correctly: " 1","I","11-19-2008"," 5:40:21","11-19-2008"," 5:40:48"," 2153","Xfr complete"," "," 801"," 809","2153"," "," "," "," "," "," "," " Transfers to Operator: " 2","I","11-19-2008"," 5:41:17","11-19-2008"," 5:42:13"," 2600","Xfr complete"," "," 801"," 809","2608"," 888"," "," "," "," "," "," "
Any help on why this is happening would be greatly appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2009
Posts: 103
Member
|
Member
Joined: Mar 2009
Posts: 103 |
check Your Group Intercom Access,check your Mailbox Transfer fields, do you have a Group Box setup? "poor mans ucd" do you have any virtual extension, could be a timing issue as well what is 2608 mailbox set to transfer to.what is your zero set to, sounds like its going to the systems default Operator box 888. You should really post this in the Comdial center there are some good tech in there. Look at your class of services make sure they are all the same for the users. run a trace ,setup your trace for DPT and from voice mail viewer start a trace. This will help you.
I am the Big Ham and I approve this message.
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
|
Most Online5,661 May 23rd, 2018
|
|
2 members (BobRobert, R4+Z),
173
guests, and
286
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|