Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Nov 2008
Posts: 1
OP Offline
Joined: Nov 2008
Posts: 1
We have a Comdial PBX system and a KeyVoice VMail system. One of the routing boxes in the Vmail system routes some of its options incorrectly.

The routing box contains 8 transfer entries. All entries ring the requested station when the transfer is made. Five of the entries transfer to voicemail if the party does not answer. Three of them route to our switchboard (operator) instead of transfering to voicemail if the party does not answer.

The routing box appears to be set up the same as others that work. I tried re-creating the routing box with the same results.

In VMMI, the stations are set up identically (with the obvious exceptions of fields that need to be unique).

I have checked the trans.txt and can find no entries for these extensions.

Directly transfering to the extensions (not through the routing box) works correctly.

In voicemail viewer I can see the incorrect transfers happening and they appear in the voicemail log.

Here are the results in the voicemail log:

Works Correctly:
" 1","I","11-19-2008"," 5:40:21","11-19-2008"," 5:40:48"," 2153","Xfr complete"," "," 801"," 809","2153"," "," "," "," "," "," "," "
Transfers to Operator:
" 2","I","11-19-2008"," 5:41:17","11-19-2008"," 5:42:13"," 2600","Xfr complete"," "," 801"," 809","2608"," 888"," "," "," "," "," "," "

Any help on why this is happening would be greatly appreciated.

Advertising Sponsor
Joined: Mar 2009
Posts: 103
Ham Offline
Joined: Mar 2009
Posts: 103
check Your Group Intercom Access,check your Mailbox Transfer fields, do you have a Group Box setup? "poor mans ucd" do you have any virtual extension, could be a timing issue as well
what is 2608 mailbox set to transfer to.what is your zero set to, sounds like its going to the systems default Operator box 888.
You should really post this in the Comdial center there are some good tech in there.
Look at your class of services make sure they are all the same for the users. run a trace ,setup your trace for DPT and from voice mail viewer start a trace. This will help you.

I am the Big Ham and I approve this message.

Moderated by  5years&counting 

Link Copied to Clipboard
Most Recent 5 Post
Saying good by to all the rest of my toshiba
by SSPhone - 05/07/21 04:28 PM
IP Office 500 V2 crash
by Mercenary Roadie - 05/07/21 08:24 AM
Random characters on screen
by dougster - 05/06/21 06:49 PM
How to subscribe to get full access.
by Ruben - 05/05/21 09:29 PM
OS UNI Card Version Question
by RM SYSTEMS - 05/04/21 04:53 PM
Popular Topics (Views)
Forum Statistics
Most Online5,661
May 23rd, 2018
Today's Birthdays
KWH, PulseDial
Newest Members
Andrea Sau, eos90066, Sonic, ERA, Mackino
49,454 Registered Users
Get Tech Support Now! Click the banner below
Get Tech Support Now!
Global Test Supply
EMP & Lightning Home Surge Protection
EMP - Click Here!
Top Posters (30 Days)
dexman 48
pvj 18
Ruben 15
bditech 11 300x250
300x250 Your Business Phone Service in the Cloud
landing page builder
Linked Banner to your Product or Website
Advertising Sponsor Spot 2
EMP Shield for Commercial - Home & Vehicle
Use Coupon code SAVE - Click Here!
Who's Online Now
30 members (sundance, nortelvoip, BobRobert, dexman, pvj, Yoda, Mercenary Roadie, CyberLaw, jeffmoss26, nameless, JBean3329, Touch Tone Tommy, Curlycord, Bushmills, Carl Navarro, Professor Shadow, SSPhone, KRRath, Ruben, justbill, gelehu, dougster, Biztel Cuban Okie Tech, hitechcomm, mongo5150,, Skunky, MooreTel, metelcom, RonP), 458 guests, and 83 robots.
Key: Admin, Global Mod, Mod
Contact Us | Telephone System Tech Support | Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers.
©Copyright Sundance Communications 1998-2021
Trusted Partners