TVS-100 MSG Waiting Code to DCS-C

Print Thread

Rate Thread

TVS-100 MSG Waiting Code to DCS-C #258997 08/26/10 05:02 AM
Joined: Jul 2003 Posts: 114 Westminster, CA, USA paulsonpd Member
paulsonpd Member Joined: Jul 2003 Posts: 114 Westminster, CA, USA	Lots of Downsizing in this economy. We try and help the clients so they stay with us when it all comes back, somday. Currently client has Premier 1224/2460 and a TVS100. I don't normally due Program work on either of these, Old company unavailable. I am moving his suite and installing a DCS-C and reconnecting the TVS voicemail. Since they don't have Inband Signalling now, I "can" just install it as is. They have to enter EXT and Password now. Tested it and it works fine. Samsung is beautifully easy to integrate, but I am clueless to change the TVS. Or find what to match. Short of going indepth with the TVS....all I would really need is the MWG codes IN the TVS so I could set the DCS-C to match. Anyone? Default MSG-on & off codes on TVS? Currently the TVS is 4 Port, I am going to connect 2 ports of a 204 SLI card. Does the TVS likely use port 4 or 3&4 for "notification" ? I may need to access the TVS after all. Will this work: https://www.voiceprocessor.info/prog-100.htm

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: TVS-100 MSG Waiting Code to DCS-C #258998 08/27/10 12:49 PM
Joined: Jul 2003 Posts: 1,136 Likes: 1 Ann Arbor, MI johnp Member
johnp Member Joined: Jul 2003 Posts: 1,136 Likes: 1 Ann Arbor, MI	Get the manual for the Panasonic TVS-100. I'm sure it will say something about inband signaling. Really, if it is 4 ports why cut it down to 2? John Support Our 9/11 First Responders Phone Booth Topic: Great song for a great cause http://www.fealgoodfoundation.com/

Re: TVS-100 MSG Waiting Code to DCS-C #258999 08/27/10 06:52 PM
Joined: May 2003 Posts: 2,924 mesquite tx brokeda Member
brokeda Member Joined: May 2003 Posts: 2,924 mesquite tx	Page 6.38 in the manual. In terminal programming I think it's Programe, System, other, PBX interface.

Re: TVS-100 MSG Waiting Code to DCS-C #259000 08/27/10 07:01 PM
Joined: May 2003 Posts: 2,924 mesquite tx brokeda Member
brokeda Member Joined: May 2003 Posts: 2,924 mesquite tx	Page 6.38 in the manual. In terminal programming I think it's Programe, System, other, PBX interface. You can plug in all the Samsung codes. Default MW is: On = T700x Off = T701x Ringback tone = 1 Busy Tone = 2 Reorder Tone = 3 DND = 4 Answer = 5 FWD to Voice Mail (ringing) 6 FWD to Voice Mail (Busy) = 7 FWD to ext ( = 8 Confirmation Tone = 9 Disconnect = #9 Plug up an old Hayes Accura Modem if you want remote.

Re: TVS-100 MSG Waiting Code to DCS-C #259001 09/02/10 04:54 AM
Joined: Jul 2003 Posts: 114 Westminster, CA, USA paulsonpd Member
paulsonpd Member Joined: Jul 2003 Posts: 114 Westminster, CA, USA	THANKS, this helped. I posted the same in Intertel and came back here to see if I got any hits. BROKEDA, thanks !! I have that manual (shows T701 & T702) didn't show a default value. I guess it really is a Intertel question, or I better "learn" the TVS. It is SO old and dirty I fear to much resetting and defaulting etc. My friend Murphy sez if it can it will....go wrong johnp..... mo money mo money mo money Samsung's are infinetly programmable and configured, allowing us to dial in the exact need WITH expansion. Often to make the sale you have to have a real sharp pencil. When they grow I can add ports and open up VM ports. revenue stream?

Moderated by 5years&counting

Hop To

Link Copied to Clipboard

sundance-communications.com/forum Forums Other TDM Phone Systems VoiceMail Systems and Programming TVS-100 MSG Waiting Code to DCS-C