|
|
Joined: Mar 2009
Posts: 26
Member
|
Member
Joined: Mar 2009
Posts: 26 |
I know that when ATT delivers a circuit it's signaling is usually b8zs/esf. Can the same be said for Verizon and other carriers that they use the same.
Thanks in advance!
tangoe09
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2007
Posts: 5,059 Likes: 6
Moderator-1A2, Cabling
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,059 Likes: 6 |
When I worked with the carriers (AT&T, Sprint, Winstar, Teligent etc.) circuits were normally installed as B8ZS/ESF because they allowed a full 64K per DS0. An AMI/SF circuit only gave you 56k on a DS0.
We would usually install an AMI circuit to older PBXs and then there was always an "are you sure? phone call that went out.
BUT - if I wanted an ESF circuit - I'd make sure I specified it.
Sam
"Where are we going and why are we in this hand basket?"
|
|
|
|
Joined: Jul 2005
Posts: 860
Member
|
Member
Joined: Jul 2005
Posts: 860 |
Moderen day T1’s are all almost exclusively ESF/B8ZS so defaulting to that would be the safe call for any LEC BUT framing and coding are set to how the circuit was ordered… It should be specified by the customer/end-user when ordered.
----------------------- Bryan LEC Provisioning Engineer Cars -n- Guitars Racin' (retired racer Oct.'07)
|
|
|
|
Joined: Jun 2007
Posts: 2,106
Member
|
Member
Joined: Jun 2007
Posts: 2,106 |
I still run into D4/AMI but it is in installation where the T1's have been there for years (5+). I haven't ran into any new circuits were D4/AMI was required (and a few were it wasn't offered).
Plus B8ZS/ESF works better. Always seemed to have strange call progress issues with D4/AMI.
|
|
|
|
Joined: Mar 2009
Posts: 26
Member
|
Member
Joined: Mar 2009
Posts: 26 |
tangoe09
|
|
|
Forums84
Topics94,518
Posts639,974
Members49,850
|
Most Online5,661 May 23rd, 2018
|
|
2 members (Toner, justbill),
281
guests, and
45
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|