|
|
|
|
Joined: May 2005
Posts: 391
Member
|
OP
Member
Joined: May 2005
Posts: 391 |
Well I went out to a customer site today to install this Adtran Netvanta 2050. I have the router programmed with the following information on the public interface...
IP Address --> 74.213.13.98
Gateway --> 74.213.13.97
Subnet --> 255.255.255.248
DNS 1 --> 66.196.216.10
DNS 2 --> 66.196.212.10
All those are verified by the carrier as good. So, I connect the Adtran to my switch and my laptop to the switch. I get an IP address and I can connect to the Adtran no problems. I can ping 10.10.10.1 and 74.213.13.98 (both IP addresses are the Adtran) just fine.
However, whenever I try to ping the gateway or any website I get nothing but time outs. So, I telnet into the Adtran and try to ping the gateway and the same websites. I always get 100% success.
So, something is wrong here. I am thinking it is something in the routes but I have not had enough experience building those routes to get it all setup. I need to know what static route I should build for all traffic that it doesn't know what to do with or whatever. I will call tech support tomorrow but I would like to know the answer tonight so I can program this thing right now and be done with it.
Thanks in advance...
www.A1Bizcom.com Specializing in selling and installing new and used Samsung systems
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2005
Posts: 391
Member
|
|
OP
Member
Joined: May 2005
Posts: 391 |
Got it. Had to setup in the security zone Many:1 NATP for the public interface.
;-)
www.A1Bizcom.com Specializing in selling and installing new and used Samsung systems
|
|
|
|
Forums84
Topics94,300
Posts638,879
Members49,770
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
