|
|
|
|
Joined: Mar 2001
Posts: 3,268
Member
|
|
Member
Joined: Mar 2001
Posts: 3,268 |
We have taken over a Comdial Impact 2448 with a KeyVoice 4 port VM. It has serial integration...the Port A is hooked up to a serial port of the VM. My question.----
how do I go about programming with a laptop or remotely without unhooking the VM from the Data Port A?? We unhooked it just for about 10 minutes and msg waiting lights seemed to come on and other lights seemed to blink on & off. When we plugged it back in...things quieted down. Any advice?? Thanks in advance.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 126
Member
|
|
Member
Joined: Jul 2001
Posts: 126 |
I believe you can use the B-port. Just gain access by using Hyper-terminal or PC plus. Just be aware that the default connection is set up as 7, 2 and 300 baud. If you cannot gain access through B-port, you will have to go in through A to see what the settings are for B. Or you can change them while you are dialed into A.
Good Luck
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Skunky),
456
guests, and
56
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
