|
|
Joined: Oct 2002
Posts: 597
Member
|
OP
Member
Joined: Oct 2002
Posts: 597 |
I need to program all the phones to ring on line 5 which i recently added. As of now it only rings x10. I have a manual , just not able to locate it.This ksu is mid 80's and the phones are black and beige with 8 line buttons at the bottom and 16 dss buttons at the top. None of the phones have displays if that matters. Can anyone help? Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
At station 10
Intercom *746*
1.Dial 10-25 the station you want to program
2.Press 1 for ringing line pref.
3.Press 2 then press the lines keys 1-8 you want to ring on that station.
4.Press * then dial the next station and repeat steps or press Monitor or Spekaer to end.
|
|
|
|
|
Joined: Oct 2002
Posts: 597
Member
|
|
OP
Member
Joined: Oct 2002
Posts: 597 |
thanks i will try it. Sounds familar
|
|
|
|
|
Joined: Oct 2002
Posts: 597
Member
|
|
OP
Member
Joined: Oct 2002
Posts: 597 |
I tried it but no success. Even used *#746*. Where you posted *746*. I found my manual but it shows using a display to program and I don't even think its the one I need. Manual was printed in 93'. All I need is to get a couple phones to ring on line 5. Is there some type of confirmation tones to listen for? I know this is simple if someone could help me.
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
It is either a 816X or a Executech II, they do program a little different. On the side of the KSU you will see a white sticker. Can you tell me exactly what it says then I will know what you are working on.
But both models program with the I*746* at station 10 with handset on-hook. And they didn't support display phones.
You have no e-mail or phone number in your profile so it makes it very hard to get with you to help. I could walk you through it in about 1 min.
[This message has been edited by dtmf (edited March 16, 2004).]
|
|
|
|
|
Joined: Jun 2001
Posts: 10,631
RIP Admin-Founder
|
|
RIP Admin-Founder
Joined: Jun 2001
Posts: 10,631 |
Is it a black or tan cabinet?
|
|
|
|
|
Joined: Oct 2002
Posts: 597
Member
|
|
OP
Member
Joined: Oct 2002
Posts: 597 |
It's a tan cabinet. Has 8 rj11 jacks for the lines and a amp conn for stations 10-25. I will still get the numbers off the sticker.
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Then it most defiantly programs with I*746*, Now we need to know if it's a 816X or Executech II
|
|
|
|
|
Joined: Oct 2002
Posts: 597
Member
|
|
OP
Member
Joined: Oct 2002
Posts: 597 |
the sticker says executech model 816 revision D ,1787 ser#40329 also it has 2 amp connectors labeled j1 and j2 and the 8 rj11's.
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Then the info I posted is the correct programming steps.
|
|
|
|
Forums84
Topics93,959
Posts637,375
Members49,702
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg)
