|
|
Joined: Mar 2004
Posts: 17
Member
|
|
Member
Joined: Mar 2004
Posts: 17 |
Im looking for software to program a Comdial Impact 1632 from a laptop while on site. Does anyone know where i can get it and how much it cost's?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
VDT is the way to go using Procomm
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Mar 2004
Posts: 17
Member
|
|
Member
Joined: Mar 2004
Posts: 17 |
would procomm plus work??
|
|
|
|
|
Joined: Mar 2004
Posts: 17
Member
|
|
Member
Joined: Mar 2004
Posts: 17 |
what version on procomm or procomm plus is needed? also, would hyper-terminal work??
|
|
|
|
|
Joined: Jul 2001
Posts: 126
Member
|
|
Member
Joined: Jul 2001
Posts: 126 |
I have used hyperterminal to connect to a 1632. I currently use ProComm plus Ver. 4.8 to connect to our DSU II.
Good Luck
2wire
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
Both will work fine, just make sure your settings match and emulate a VT100.
mark
|
|
|
|
|
Joined: Mar 2004
Posts: 17
Member
|
|
Member
Joined: Mar 2004
Posts: 17 |
What comport do you use and what are the settings for the port? thanks
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
com port 2
you should check the system programing to see what the baud rate and other settings are, you can do this through ext 10 I think it's program 15 and step through the com ports by pressing 1, 2, etc.. But I didn't look that up in the manual.
or just try 9600 - 8 - 1 first.
|
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
That is the right program to check port 1 and 2 for baud rate.
Russ runs a local service and private tech center. [/url]
|
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
You might want to stay with com port 1
Most older (but not all) Comdial products have com port 2 at 300,7,2, by default for SMDR. If SMDR is turned (port 2)on and there is traffic on the switch you may not connect even if everything is correct.
|
|
|
|
Forums84
Topics94,526
Posts640,017
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (Toner, Skunky),
211
guests, and
47
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
