|
|
|
|
Joined: May 2004
Posts: 10
Member
|
OP
Member
Joined: May 2004
Posts: 10 |
I have a Comdial Executech 2000 system. I AM NOT a telephone installer but I am the owner of this system and am responsible for all the programming.
I am trying to connect the KSU to a PC for remote programming. I have the owners manual but still cannot get the remote programming to work.
I have attached an RS-232 Seriel Cable to the Data Port on the Comdial and the other end in to COM1 on the PC. I am attempting to connect using Windows Hyperterminal but can't seem to get a connection.
Does anyone know anything about this? Am I using the correct cable? Is it plugged into the correct port(s)? What settings should I use in Hyperterminal?
Any help will be greatly appreciated.
David
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 7,350
RIP Admin
|
|
RIP Admin
Joined: Mar 2001
Posts: 7,350 |
Use Port A
RS232
2 - TD
3 - RD
7 - SG
7-bit
2-stop
no-parity
300 baud (default) could have been changed
[This message has been edited by dtmf (edited May 25, 2004).]
Russ runs a local service and private tech center. ![[Linked Image from sundance-communications.com]](https://www.sundance-communications.com/installers/logos/65graphic.jpg) [/url]
|
|
|
|
|
Joined: Jan 2002
Posts: 2,328
Moderator-Comdial
|
|
Moderator-Comdial
Joined: Jan 2002
Posts: 2,328 |
If you have a 9 pin com port then SG goes to pin 5.
|
|
|
|
Forums84
Topics94,284
Posts638,771
Members49,765
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
152
guests, and
283
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
