|
|
|
|
Joined: Sep 2004
Posts: 25
Member
|
|
Member
Joined: Sep 2004
Posts: 25 |
I have a dxp plus I am using for testing and finally am able to connect to it directly through serial port on my laptop using hyperterminal with direct serial port connection. This is working fine. Now I would like to connect to it using vmmi. It keeps erroring out when I try to connect saying to check to make sure communication parameters are correct. I am using the same parameters as with hyperterminal.
9600 bits persecond, 8 data bits, no parity, 1 stop bit.
In hyper terminal it gives me option for flow control which I set to none. I don't see this option in vmmi (I guess the flow control setting isn't important for vmmi)
The dxp plus is running release 174 with feature set 15b. The vmmi I have is release 195 with latest supported feature set being 17d (build # 17.11.03)
I even tried some old versions of vmmi that I had on a cd that a phone guy gave me. They didn't work either.
Can someone help me to figure this one out. I am new to this stuff so there may be an easy answer. Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2004
Posts: 25
Member
|
|
Member
Joined: Sep 2004
Posts: 25 |
I just figured it out. I was logging into dxp through hyper terminal and not logging out. Then I would immediately after try to login to vmmi and it wouldn't work. This was because I just disconnected my hyperterminal session but didn't logout of the dxp. Duh! As I said, I am still learning.
|
|
|
|
Forums84
Topics94,565
Posts640,180
Members49,869
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
20
guests, and
49
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
