|
|
|
|
Joined: Apr 2005
Posts: 228
Member
|
|
Member
Joined: Apr 2005
Posts: 228 |
Well normally IT guys don't carry around scopes but I do have one, unfortunately I just don't have a probe for it right now. Once I pick one up I'll check it out and let you know.
I was thinking about the last post and in fact our power blipped yesterday, and about 2 hours later the system did fail. Now I'm hoping the power blips again so I can see if its consistent! When I say blip - I mean the lights flicker for a split second, just enough to make the relays click on the UPSes.
Thanks,
Jeff
Mitel 3300Mxe running MCD 4.0, 5340 Phones
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2005
Posts: 228
Member
|
|
Member
Joined: Apr 2005
Posts: 228 |
Well as an update, we've since replaced almost everything in the system, but I found 1 or 2 of the wires going to the VM serial port to be disconnected. When I hooked my laptop up to the serial port I couldn't even get a login screen (was all garbage), I have no idea how it ever worked to begin with.
It may have been one of the other boards or something too, but so far we've had no locks! The serial port was wired very poorly, and I've since redone it and all is well!
*knock on wood*
Mitel 3300Mxe running MCD 4.0, 5340 Phones
|
|
|
|
Forums84
Topics94,527
Posts640,019
Members49,852
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
103
guests, and
48
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
