sundance-communications.com/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems Programming 16x32 Compact

Hello All!
I just changed out a 8x16 compact and replace it with a 16x32. The customer has 8024S Comdial Impact Phone sets. I powered it up and customer is pleased that they are back inservice.The system can up default- having Sta 10 the only station ringing. Also I noticed that when I was in the programming mode, sta 10 did ring incoming. I managed to set the time but I had trouble programming the following:

Programming all phones( sta.10-25 to ring lines 01 to 04

programming for auto line selection pick up

I am a Avaya Guy and don't have a lot of experience with Comdial

The progrmming from sta 10 doesn't seem too bad
Thank for your help
Lou

With 8024 model phones I know you have a digital system but which one, station 10 tells me it must be DSU, or DSUII.
Program 54 is for ringing, a 1 is for direct ring and a 2 is for delayed ringing. Select lines and dial #, then select stations and dial *.
Do you have a manual?

Yes, I think it is a DSU. Is there a way you can check thru the programming to make sure? No I do not have an manuel

Is it a black cabinet (DSU) or a gray cabinet (DSU II)?
There should also be a sticker on the side with a model #. It should be something like G1632 or J1632.
Last, the G series (DSU, black cabinet) have a software cartridge (about the size of a pack of cigarettes) that is stuck into the top of the cabinet.

It is a black cabinet

DSUI. Programs the same as Cmdl_Guy says. You really need a manual if you're going to program it.

Where can I get one?

Manuals link at the top of the page.

Thanks!!!