Set Line to be DISD|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Set Line to be DISD #35102 08/31/06 10:30 AM
Joined: Jun 2006 Posts: 17 Rockville leowang0801 OP Member
OP leowang0801 Member Joined: Jun 2006 Posts: 17 Rockville	How to set one of lines to be direct inward station dialing (DISD) for DSU II phone system? Also, how to determine which outside line mapping the line port? Because we have 5 phone lines with 8 lines PBX(J0816), and it shows it detect 8 lines. Thanks very much.

Atcom VoIP Phones

Best VoIP Phones Canada

Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Re: Set Line to be DISD #35103 08/31/06 10:57 AM
Joined: Aug 2004 Posts: 9,159 Likes: 16 SOUTH TEXAS RATHER BE FISHING Admin
RATHER BE FISHING Admin Joined: Aug 2004 Posts: 9,159 Likes: 16 SOUTH TEXAS	Leo it is obvious that you are not an installer. Please consider hiring a certified installer to fix your issues. A one hour service call will certainly be more cost effective than posting question after question of basic installer info.

Re: Set Line to be DISD #35104 08/31/06 10:58 AM
Joined: Nov 2002 Posts: 343 DETROIT, MI, USA TELCOM Member
TELCOM Member Joined: Nov 2002 Posts: 343 DETROIT, MI, USA	Leo AS HAS BEEN STATED HERE https://www.sundance-communications.com/forum/ultimatebb.php?/ubb/get_topic/f/2/t/001379.html If you can not follow this then call a tech you will come out way a head in the long run.

Moderated by 5years&counting, jwooten, RATHER BE FISHING

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems Set Line to be DISD