|
|
|
|
Joined: Oct 2003
Posts: 25
Member
|
|
Member
Joined: Oct 2003
Posts: 25 |
I need to add a pri to a DXP. I know PRI's, installed over a dozen on Mitel but never installed one on the Comdial DXP. The dxp has a DXCPU-68K DXRAM-EXP68K REV.C 4-98 DXPSW-DLR REV 9C. Will this support a PRI? I know I need the DXPT1-PRI card and the DXPOPT-SYN card, anything else? If not will it support a T1?
Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
Putting a T-1 in a DXP with 9C may be difficult. You need a DXAUX board to support the DXOPT-SYN card and it has a dedicated slot. The T-1 board will only work in specific slots and if the cabinet is very old it will not be marked properly. Also, while the board will take up one slot physically it will take 2 slots software wise and no card can be used in that other slot.
The slots you can use with that software are line 2, or univ. 5, 8,and 12.
This software will not support PRI
|
|
|
|
|
Joined: Oct 2003
Posts: 25
Member
|
|
Member
Joined: Oct 2003
Posts: 25 |
Thanks, It does have a UNIV slot labeled T1 and it does have an aux card. Does it take a specific aux card to support the DXOPT-SYN?
|
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
No the aux card you have should be fine.
|
|
|
|
Forums84
Topics94,493
Posts639,867
Members49,836
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
202
guests, and
57
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
