This is a complete system that I have for sale. It was pulled from a client about a year ago and is in great shape.
I have all the manuals for the phones and voicemail software and software CDs. I also have the labeling software and blank phone button cards to print on.
All reasonable offers will be considered.
Thanks,
Justin (justin_at_justinleger_dot_com)
Vodavi System
-------------
96 Digital Telephone Extensions
12 Single Lines
16 CO Lines
1 T-1 interface of up to 24 channels
48 24-button Executive Speakerphones
4 48-button DSS Console
2 8-button Basic Speakerphone
Amanda Voicemail Server
-----------------------
Amanda @ large.office v 2.0
1 Intel Pentium Server
2 Rhetorex RDSP 432 Voice Processing Boards
1 High Speed Serial Card (2 Ports)
1 10/100 Ethernet Card
Complete Part listing
---------------------
<table border="1" cellpadding="4" cellspacing="0"><tr><td width="100">PART #</td><td width="75">QTY</td><td width="298">DESC</td></tr><tr><td>IN9000-00</td><td>1</td><td>DVXPlus IV Basic Key Service Unit (BKSU) - Basic cabinet, 1 required with each system, can work with an expansion cabinet for a maximum of 17 card slots. Houses 1 or 2 power supply(s), DC/DC board, CPU & peripheral boards</td></tr><tr><td>IN9071-15</td><td>2</td><td>Power supply--15amp (PS15) - Power supply requirements are based on boards used in the system. Digital station boards require more power than other types of boards. See charts in manual for guidelines or use ConfiguratorTM auto-quote program.</td></tr><tr><td>IN9002-02</td><td>1</td><td>DVXPlus IV Expansion Key Service Unit (EKSU2) - Expansion KSU 2 (6 slots, no T-1) for COs & Station Boards</td></tr><tr><td>IN9073-00</td><td>1</td><td>Ring Generator Unit (RGU) - Used whenever single line telephone boards are installed on system. Supplies ring & message waiting voltage</td></tr><tr><td>IN9074-00</td><td>1</td><td>DC/DC Converter (DCCU) - Required for system, converts 24 volt DC power to regulated voltages (+5v,-5v,+12v) Also provides--48v for DID board</td></tr><tr><td>IN9032-00</td><td>4</td><td>Digital telephone interface board -- 12 (DTIB) - Equipped for 12 digital station ports Supports the IN9032-10 expansion board</td></tr><tr><td>IN9032-10</td><td>4</td><td>Digital telephone interface board expander - 12 (DTIB-E) - Equipped for 12 digital station ports & mounts on a IN9032-00</td></tr><tr><td>IN9033-00</td><td>1</td><td>Single line interface board -- 12 (SLIB) - Equipped for 12 single line telephone ports Requires RG</td></tr><tr><td>IN9031-00</td><td>2</td><td>Loop Start CO board (LCOB) - Equipped for 8 loop start CO lines, up to 120 lines max</td></tr><tr><td>IN9031-31</td><td>1</td><td>T-1 interface board (T1IB) - Supports direct T-1 interface of up to 24 channels A maximum of 6 T-1s per system (ver. 1.3 or higher software)</td></tr><tr><td>IN9030-30</td><td>1</td><td>Serial Interface Unit (SIU) - Provides 2 additional RS-232C Ports using RJ-45 jacks used for SMDR</td></tr><tr><td>IN9030-40</td><td>1</td><td>Phase Lock Loop Unit (PLLU) - Required when using T-1 board to regulate clock signals</td></tr><tr><td>IN9030-01</td><td>1</td><td>Master processor board (MPB) - MPB required with each system. Supports Program Module, 1 on-board RS-232 Port & modem for remote programming. Optionally can support Serial Interface Unit for 2 additional RS-232 Ports & Phase Loop Lock Unit</td></tr><tr><td>IN9035-00</td><td>1</td><td>Miscellaneous service board (MSB) - Required to support background music/music on hold (2 channels), 6 relays (misc.), 2 external page zones & 2-DTMF Rec.</td></tr><tr><td>IN9015-71</td><td>48</td><td>24-button Executive Speakerphone 12 flexible buttons & 24 fixed buttons with LCD</td></tr><tr><td>IN9010-71</td><td>4</td><td>48-button DSS Console</td></tr><tr><td>IN9011-71</td><td>2</td><td>8-button Basic Speakerphone 4 flexible buttons & 4 fixed buttons</td></tr></table>
