|
|
|
|
Joined: Nov 2007
Posts: 77
Member
|
OP
Member
Joined: Nov 2007
Posts: 77 |
We're doing some Asterisk->Comdial integration and I seem to have hit a "either/or" impass.. On outbound CID (Comdial to Asterisk on PRI), I can set "Calling Number ID Mode" to either "Station Number" or "Default w/Station ID" (in my situation). With station ID set to "full name", "default with station id" sends the name plus the default number on the PRI. Station number does as I would expect and send only the number. Is there a configuration to send both the station ID AND station number?? 
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2006
Posts: 328
Member
|
|
Member
Joined: Mar 2006
Posts: 328 |
Sounds like a question for Kumba. He has worked with asterisk quite a bit. If he doesn't read this post and chime in you might try PMing him.
|
|
|
|
|
Joined: Nov 2007
Posts: 77
Member
|
|
OP
Member
Joined: Nov 2007
Posts: 77 |
I'd say it's a bit more on the Comdial side, I think... What I'd like is "Station Number w/Station ID", but I can't seem to find a combination of options to do that. Asterisk will accept what ever I send out for CID info, I just need to figure out how to make the Comdial switch do it...
Maybe I just can't have my cake and eat it too... :bang:
BTW, forgot to mention, we're doing this on an FXII
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (Toner),
143
guests, and
414
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
