|
|
|
|
Joined: Oct 2008
Posts: 25
Member
|
OP
Member
Joined: Oct 2008
Posts: 25 |
Ok guys, thanks
I will find out my minimum message length.
The timing function is called "Abandon Hold Realease" correct?
In this setting I have two choices, 350ms, or 50ms. All of my lines are set to 350ms now. I will call my CO and check their end.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Oct 2008
Posts: 25
Member
|
|
OP
Member
Joined: Oct 2008
Posts: 25 |
Hey Justin,
I can't find minimum message length. Sorry.
Is it called something else? Or maybe I'm just looking in the wrong place. I can find max message length, but not minimum.
Casey
|
|
|
|
|
Joined: Oct 2008
Posts: 25
Member
|
|
OP
Member
Joined: Oct 2008
Posts: 25 |
Hey guys,
I think we've got it!
I checked with the CO and six of my lines had a different release signal than the two that were hanging on. The tech changed the timing to match the other six. I went over to the office today to test the lines and they both disconnected withen five seconds. I tested both many times and different ways, and they worked great each time.
Thank you guys so much for your support. I will keep you posted if it comes back.
Casey Franks
|
|
|
|
Forums84
Topics94,291
Posts638,821
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
95
guests, and
97
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
