sundance-communications.com Forums Telephony Discussion Phone & VoIP Systems Samsung Telephones & Systems DCS Compact

I currently have a Samsung DCS Compact Phone system in my office. At the moment all the telephones rings, but can someone tell me how to change it so one telephone rings.

Go into programming trans 800 enter password +1 press spk key dail 406 and identify were trunks ring write them down press spk key dail 600 for operator group 500 use your volume keys and scroll to members press upper right soft key to move cursor under member number press hold to remove any members not needed in group press spk key dail 601 and do the same for any other groups that may be ringing be aware of group 529 it is the vm group if you have one and dont remove any members there. Email me if you need further help

------------------
Altcomm @ A.S.E Inc

Easiest way to remove a member from a group.First determine which group is doing the ringing.Then at each phone you don't want to ring go 53XXX0 where XXX is the group that is ringing.

YEP THAT WORKS MY MIND IS ALWAYS IN PROGRAM MODE THO HIS WAY IS MUCH FASTER