|
|
Joined: Feb 2004
Posts: 839
Member
|
OP
Member
Joined: Feb 2004
Posts: 839 |
I have a site that lines 5 and 6 will not work when both punched down on the C1 card. One or the other. When nothing is punched down on line port 5 or 705, line 6 works.
nd vice versa. When both lines are punched down, only one works.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: May 2004
Posts: 750 Likes: 1
Member
|
|
Member
Joined: May 2004
Posts: 750 Likes: 1 |
Did you check cabling from KSU to block. Sounds like you have a mixed pair
|
|
|
|
|
Joined: Feb 2004
Posts: 839
Member
|
|
OP
Member
Joined: Feb 2004
Posts: 839 |
Yes. We changed out all the anphenols and new blocks. I think it is crossed as well, but on the backplane. I found x 209 on the last terminal(on the 66 block) on DLI 1 and the first terminal of DLI 2. Bizarre huh?
|
|
|
|
|
Joined: Sep 2001
Posts: 2,307 Likes: 6
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,307 Likes: 6 |
I'd find it hard to be a backplane when the stations and trunks pin right out of the front of the cards.By your first post I'd guess the problem is with the trunk card itself or the co pairs are crossed coming into the building if the amphenols and blocks are ok.As for 209 running on the last pair and first pair of 2 different cards are they on different cables or is the cable split to more than 1 card?
|
|
|
|
|
Joined: Feb 2004
Posts: 839
Member
|
|
OP
Member
Joined: Feb 2004
Posts: 839 |
They are on different cables and boards as far as the x 209 goes.
|
|
|
|
|
Joined: Dec 2004
Posts: 4,096
Member
|
|
Member
Joined: Dec 2004
Posts: 4,096 |
Maybe the x209 problem is in the dail number plan look there mmc 724 I believe, I dont know about the CO line tho it seems to me that PVJ is on target Check the actual pins on the card sometimes they get bent ( the male side) if the cables are pulled off often ------------------ Altcomm @ A.S.E Inc
|
|
|
|
|
Joined: Feb 2004
Posts: 839
Member
|
|
OP
Member
Joined: Feb 2004
Posts: 839 |
I am going back to trace everything out and see if I can find something.
|
|
|
|
Forums84
Topics93,969
Posts637,428
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
