|
|
Joined: May 2005
Posts: 6
Member
|
OP
Member
Joined: May 2005
Posts: 6 |
Trying to update a iDCS 500 rel 1 ver Software M to iDCS 500 Rel 2 ver L software. I have the parts needed but not the full info. I have the PCMMC which does support both versions of the software/hardware so here goes with the questions
1- Can i back up the REL-1 Ver-M and restore programming to REL-2 Ver-L ( using the software over a lan connection
2- Are there any other considerations in programming the new version, ie: incompatibilities.
The reason or the upgrade is DID limitations of the REL M software and the near term need to add a second cabinet for the system.
Any help is appreciated.
Thanks
Essm
|
|
|
|
|
Joined: Feb 2005
Posts: 137
Member
|
|
Member
Joined: Feb 2005
Posts: 137 |
You have to use the most up to date OSM make a backup of your Rel1 then go off line. You then can use the OSM to do database conversion. Now remember there are a few MMCs that wont convert Samsung sent out a tech bulliten on this.
|
|
|
|
|
Joined: May 2005
Posts: 6
Member
|
|
OP
Member
Joined: May 2005
Posts: 6 |
Thank you I will give it a try, I assume VER L works for rel 1 or 2 (except for the MMC's that do not copy
Steve
|
|
|
|
Forums84
Topics93,880
Posts637,004
Members49,673
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
