|
|
|
|
Joined: Jul 2006
Posts: 82
Member
|
OP
Member
Joined: Jul 2006
Posts: 82 |
Just hooked up a 2-port StarMail to a DCS Compact.
Purchased a 2 SLI card, stations numbered 221, 222.
Connected both ports to these stations. Did the recommended programming. Just to make sure I'm not being a dumb*ss, how do I "call" into the voicemail? I should just be able to dial 221 or 222, OR the VM group that I've designated as 505.
What happens is: 221 or 222 says "Busy". 505 says "not assigned".
Unplug the ports on the VM, and it rings fine.
I have an 816 port card in the StarMail.
Any suggestions?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
You need to have an analog port card in the StarMail, not an 816, and I can swap card for card if you like.
Also there is a fair amount of programming you need to do such as ports in 207, etc.
This is not critical hard, just have to have some help.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
131
guests, and
425
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
