|
|
|
|
Joined: Jun 2006
Posts: 32
Member
|
|
Member
Joined: Jun 2006
Posts: 32 |
Working on an IDCS 100 with expansion cabinet and a TEPRI card with 8 channels connected The customer wants to downgrade to analogue lines Prior to ceasing the ISDN lines I would like test that the card is working correctly The new card is in slot one of the 1st cabinet and I don't seem to be able to assign the lines to the system Any help would be appreciated Many thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2006
Posts: 185
Member
|
|
Member
Joined: Aug 2006
Posts: 185 |
Did you do MMC 806 on the slot to tell the system that the card is there? If there was something there before it, then I would clean the database first then install the new card
|
|
|
|
|
Joined: Jun 2006
Posts: 32
Member
|
|
Member
Joined: Jun 2006
Posts: 32 |
Yes I did MMC806 however there was a DLI card there previously If this does cause potential problems I will try an unused slot Thanks
|
|
|
|
|
Joined: Aug 2006
Posts: 185
Member
|
|
Member
Joined: Aug 2006
Posts: 185 |
It's not a problem, I would make sure all the information for the earlier card has been removed in 724. If you haven't done it, try removing the new card do a 806 and change the slot to vacant, power down and add the new card and 806 that card to the slot. Then check 724 for that slot to add numbers
|
|
|
|
|
Joined: Aug 2006
Posts: 185
Member
|
|
Member
Joined: Aug 2006
Posts: 185 |
I would check the Samsung web site, I think there is a problem with a co card in the 1st slot tho
|
|
|
|
|
Joined: Sep 2006
Posts: 132
Member
|
|
Member
Joined: Sep 2006
Posts: 132 |
Does the PRI need two slots to operate and you put the Trunk card in the slot after it?
|
|
|
|
|
Joined: Jul 2003
Posts: 6,768
Member
|
|
Member
Joined: Jul 2003
Posts: 6,768 |
No the PRI doesn't need two slots, some switches do, such as the Comdial DXP. The PRI will work only in the expansion cabinet, there is no way to put the trunk card after the PRI. The PRI has to go in the last slot of a 3/1 cabinet or in one of the last two slots in a 2/2 cabinet. The trunk card will only go to the left.
|
|
|
|
|
Joined: Nov 2001
Posts: 2,500
Member
|
|
Member
Joined: Nov 2001
Posts: 2,500 |
No, the PRI card will only go into the last slot of the expansion cabinet. The TRK cards can go in any other but the last.
Rhett
|
|
|
|
|
Joined: Jul 2006
Posts: 99
Member
|
|
Member
Joined: Jul 2006
Posts: 99 |
Have you went into MMC 724 and made sure there are 7xx numbers listed next to the trunk card?
|
|
|
|
Forums84
Topics94,574
Posts640,230
Members49,876
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
398
guests, and
62
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
