|
|
|
|
Joined: Dec 2004
Posts: 22
Member
|
|
Member
Joined: Dec 2004
Posts: 22 |
Hi there,
Can Samsung DCS 816 systems present the callers
numbers on 12-button display phones if the system
is connected to two CLIP enabled analogue lines
wired to 701 and 702?
We have a Samsung DCS 816 which has been working using 2 ISDN2e boxes attached to its BRI card.
When we were using it, it was showing CLIP information on inbound calls.
I have recently given the system to a friend who has a small company and connected it up to 2x analogue lines (both with CLI enabled) but for some reason the system does not show inbound callers numbers.
I cannot remember if this possible and have searched through every MMC.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Apr 2005
Posts: 52
Member
|
|
Member
Joined: Apr 2005
Posts: 52 |
Is CLI (caller ID)? If so then look at MMC 414. In the US the choices would be normal or CID Trunk. Am not sure of the UK version. I hope this helps!
FTorres388
Calm seas do not make skilled sailors.
|
|
|
|
|
Joined: Dec 2004
Posts: 4,096
Member
|
|
Member
Joined: Dec 2004
Posts: 4,096 |
The software should be supporting it so I would take the advice posted before me.
Note
the 816 is similar to our 616 and the mmc's pretty much match except a few that we dont have or use here
|
|
|
|
Forums84
Topics94,515
Posts639,960
Members49,847
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
