|
|
Joined: Aug 2006
Posts: 98
Member
|
|
Member
Joined: Aug 2006
Posts: 98 |
I have a DCS with one expansion cabinet. The software that I'm running is ROM 2003-10-27 V4.8, CPM 2001-9-24 V4.4 and LPM1 2001-9-24 V4.4. The problem is every morning when the customer comes in the expansion cabinet is not recognize by the main cabinet. therefore everything that is working out of it is down. I have to either reset the system or unplug the cable between the two cabinets. I have changed out the power supplies in both, I changed out the cable between them, and have changed out both the A and B expansion cards. The system retains all its programming for the expansion cabinet and work fine after the reset. I'm have the following cards in the system. Pwr supply 60, C1, C1, DLI, DLI, DLI, SVMI-8, EXP-A. The expansion has 60, DLI, DLI, DLI, SLI and EXPB. I have defaulted the system and reprogramed it with no luck. I am running out of ideas
:bang:
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
What about the Rom card?Have you tried replacing it?I don't see much else to replace.
|
|
|
|
|
Joined: Aug 2006
Posts: 98
Member
|
|
Member
Joined: Aug 2006
Posts: 98 |
Thanks, no I have not yet. The reason I haven't is the system runs fine as a single cabinet. But I think I can get my hands on a spare ROM. Good thing I did a down load of the system. Any other ideas?
|
|
|
|
|
Joined: Nov 2005
Posts: 148
Member
|
|
Member
Joined: Nov 2005
Posts: 148 |
MJRosko,
had they same problem along time ago.
I reversed the cabs, making the exp the main.
The problem moved .Found a bad cab backplane.
D.
Dennis
Samsung Authorized Dealer, AVAYA reseller, One Communications Team Partner
|
|
|
|
|
Joined: Aug 2006
Posts: 98
Member
|
|
Member
Joined: Aug 2006
Posts: 98 |
I don't beleave that the main cabinet and the expasion are interchangable, I will need to look at that. But to answer you question No I hadn't tryed that.
|
|
|
|
|
Joined: Jun 2005
Posts: 204
Member
|
|
Member
Joined: Jun 2005
Posts: 204 |
They are interchangeable.
|
|
|
|
|
Joined: Nov 2006
Posts: 10
Member
|
|
Member
Joined: Nov 2006
Posts: 10 |
They are not interchangeable, the expansion cabinet does not have a slot for the ROM card. The CPM chip for the main cabinet is 32 pins, the expansion cabinet is equipped for the LPM which is 28 pins.
|
|
|
|
|
Joined: Dec 2004
Posts: 4,096
Member
|
|
Member
Joined: Dec 2004
Posts: 4,096 |
|
|
|
|
|
Joined: Jun 2005
Posts: 204
Member
|
|
Member
Joined: Jun 2005
Posts: 204 |
can a base cabinet be used as an expansion cabinet? ie. 2 main cabinets tied together?
|
|
|
|
|
Joined: Jul 2003
Posts: 114
Member
|
|
Member
Joined: Jul 2003
Posts: 114 |
MJRosko:
Please let us know what you found out!
The DCS is a GREAT System and the older
ones will (may) start to see some unusual problems.
|
|
|
|
Forums84
Topics94,521
Posts639,995
Members49,851
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (justbill),
207
guests, and
47
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
