sundance-communications.com/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems Voip Audio

Hello all,

Just seeing if anyone else has experienced the whole one way audio on a voip phone. This is the first one I have setup so we are trying it in the office through 2 seperate internet connections.
Here is what I have so far.....
Port forward (public IP MCP) 7200 Router --> 6000 to the MCP UDP

Port Forward (public IP MCP) 7200 Router --> 30000 to the MGI UDP

Port Forward (public IP MCP) 7200 Router --> 30000 to the MGI UDP
Is there someonewhere else these settings exist other than in xxx in "public port"? I have it set to 30000 their but I haven't found anywhere to put the 30001. I currently am connected with the ITP with dial tone but connect send audio. I receive audio no problem. Any thoughs?

As simple as I can be.

Set your ip for private with public.

I can not go into great detail on the open board because this is detailed programming not user guide or admin information.

Please feel free to pm any of the well qualified posters in this topic with your question. Keep in mind you will need to be as detailed as possible.

Thank you for understanding and

Oh and you can do a search here and find the answers you are looking for. Sometimes we all just need to read a little to jar the answer loose even if we knew it already. :thumb: