| | Joined: Aug 2007 Posts: 12 Member | OP  Member Joined: Aug 2007 Posts: 12 | We are rebuilding a system that we are working on which is a IDCS 500. We are adding a cadence VM unit into it but for some reason its not working with the 4 digit extensions. First of all will the cadence work with this model and second of all how do I get this to 3 digits. BTW this is a Rev 1.3 | | | | | Joined: Sep 2006 Posts: 530 Member | | Member Joined: Sep 2006 Posts: 530 | There is a jumper switch on the MCP. Your manual will tell you which switches should be set to on or off. Not sure about the Cadence I use the SVMI. | | | | | Joined: Jan 2007 Posts: 254 Member | | Member Joined: Jan 2007 Posts: 254 | The Cadence should work in the iDCS 500. The Cadence can be changed to 4-digit mailbox numbering as well, see MB Width in the manual.
Strike that, MB Width limited to 2 or 3 digits. When stations are 4 digits Cadence will associate the last 3 digits as the mailbox number (i.e. ext. 2246 has mailbox 246). | | | | Forums95 Topics94,291 Posts639,140 Members49,425 | | Most Online5,661
May 23rd, 2018 | | |
38 members (Coral Tech, sundance, pvj, NECIITech, dexman, EV607797, Tech2014, RM SYSTEMS, John807, bditech, hbiss, paulw, Allied Telcom, Ruben, Touch Tone Tommy, nameless, justbill, westerntelephone, RonP, vicbob, RATHER BE FISHING, Silversam, FoneJacker, Canteleco, KRRath, High Mesa Communications, nfcphoneman, Iwatsu Guru, hitechcomm, jknichols, Yoda, BTS01, OBT, kevinoffsite, BobRobert, metelcom, MooreTel, morephones),
531
guests, and
40
robots. | | Key: Admin,
Global Mod,
Mod | | |
|
