atcomsystems.ca/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems OfficeServ 500 & Barge In

Hi, does anyone know if the OfficeServ 500 can do Barge In?

In the OfficeServ manager, I can set 206 Barge In Type. But if I go to 722 Station Key Programming, I cannot add a BARGE key. BARGE is just not in the feature list.

Searching on the web, everywhere I read it looks like the OS500 has barge capability.. yet the tech who installed it always said it couldn't do it.. but I don't know if that is not just because we didn't pay for it an an extra. (ie. he would just flip a dip switch to enable it if we did - I wasn't around when the thing was bought)

Thanks.

You really don't need a key for barging. It is a soft key option that will appear when the station is busy (only on an outside call). There is though a programable barge in key simply BARGE in MMC programming. And yes the 500 can do barge in. The COS settings need to be set up correctly (technician level programming) and so does the station COS (technician level) for it to work. There is also a setting for barging with or without tone. The only reason I could see it wouldn't work is if the AU version of the 500 operating system left that out for some reason. Here in the US it exists in all Samsung systems as a feature.

The barge in facility can be accessed through the on screen options.

When you have dialled the extension number and get engaged tone, press the scroll key and the option for Barge should appear.

(This will only work if your tech has set up class of service for barge)

Pretty much what I said.

Just don't forget the CRC needs to be set at 0 and DON'T press the mute key. Mute is automatic

Thanks guys, I'll give it a go.

But he had a better accent.

One question, if the extension you want to dial has busy/no answer set to forward to VM how do you barge that station?

You dont. You must have a busy response from the station to barge.

How do you disable an extension from being barged in on?