|
|
|
|
Joined: Mar 2007
Posts: 9
Member
|
|
Member
Joined: Mar 2007
Posts: 9 |
Hi, I have iDCS 100, v2.66, MGI16, 6trank card, SVMi4, smt-r2000, WIP-5000M phones.
I hear at conversation noise, as shots
How will get rid of them?
And still, if I change IP adress on MGI (MMC831), all the same it pinging on the old
How it to repair?
OfficeServ Manager Launch Pad ver 1.11
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Sep 2006
Posts: 530
Member
|
|
Member
Joined: Sep 2006
Posts: 530 |
Don't try to make changes to the MGI with OSM. Use a keyset to change the MGI IP address. Then cold bot the system for good measure.
As far as shots go,,duck. Seriously though I've never any sounds like that. Might be some kind of electronic interference.
|
|
|
|
|
Joined: Mar 2007
Posts: 9
Member
|
|
Member
Joined: Mar 2007
Posts: 9 |
Noise reminds more sound of falling and after that audibility in general somewhere on a floor of second disappears
And the address on MGI16 I change through keyset ÃÅ“Ãχ831 and do restart in the same place then I disconnect all system
And after inclusion all the same pinging on the old address
I having this problem on other iDCS 100 in other location, becose I dont think about electronic interference
|
|
|
|
|
Joined: Oct 2007
Posts: 157
Member
|
|
Member
Joined: Oct 2007
Posts: 157 |
Its a little bit hard to understand exactly what you are saying but there was a bug on the iDCS 100 where if the IP was changed via OSM then it could not be changed again via OSM or Keyset.
Samsung, Ericsson, NEC, Nortel Certified Installer
|
|
|
|
|
Joined: Mar 2007
Posts: 9
Member
|
|
Member
Joined: Mar 2007
Posts: 9 |
Noise arises at silent sounds
May be this problem in microfone amplifier?
How I can adjust it? I appreciate your thanks
|
|
|
|
|
Joined: Aug 2006
Posts: 185
Member
|
|
Member
Joined: Aug 2006
Posts: 185 |
Is this between 2 100 R2 systems both running 2.66? If so, is both MGI's the same software release? Sam Tech is 100% correct. To change the IP on the MGI you must do it via KMMC and yes it will disconnect the network connection. That is the only way to do it! Also check the MGI16 settings in the system software. You might also want to do a ping test to see the travel time
|
|
|
|
Forums84
Topics94,512
Posts639,934
Members49,844
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
