|
|
|
|
Joined: Mar 2008
Posts: 4
Member
|
|
Member
Joined: Mar 2008
Posts: 4 |
I've got the KDBSLI card in a 24 button phone and plugged in a single line phone to it then plug in the deskset back into the system. The deskset works fine but nothing on the single line phone - no dial tone. Does it have to be programmed? Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2004
Posts: 4,096
Member
|
|
Member
Joined: Dec 2004
Posts: 4,096 |
what is the ext of the keyset? if it is 203 then dial 303 and see if the sli rings. You may need to check you dial number plan and make sure the numbers are seen. Other than that it should get a system tone when off hook. You might have a bad KDB. Or the ribbon cable is not seated.
|
|
|
|
|
Joined: Sep 2001
Posts: 2,360 Likes: 9
Moderator-Executone-Isoetec, Samsung
|
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,360 Likes: 9 |
If it's a DCS system remember that only stations in the main cabinet can have daughterboard cards in them.
|
|
|
|
|
Joined: Mar 2008
Posts: 4
Member
|
|
Member
Joined: Mar 2008
Posts: 4 |
It's Ext. 250 andI tried 350. I'll check the card connect and cabinet connection. Thanks
|
|
|
|
Forums84
Topics94,515
Posts639,967
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
311
guests, and
35
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
