|
|
|
|
Joined: Mar 2007
Posts: 44
Member
|
|
Member
Joined: Mar 2007
Posts: 44 |
SIP Cli on Voiceflex
Has anyone had any joy with this as yet ?
I have a 7200 system, v4.14, when i try to send Cli, the samsung sends the cli number as the SIP Acc No and voiceflex disconnect it.
Any work arounds ?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jan 2008
Posts: 28
Member
|
|
Member
Joined: Jan 2008
Posts: 28 |
As I understand you are using a registration… What type of CLI is Voiceflex waiting from Samsung? You can make a traceroute and find on it disconnect reason, or send it to me. I’ll try to find a reason…
|
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
What CLI table have you programmed in the sip options?
What number do you have in the corresponding cli table for the extension you are calling out on?
Also what do you have set as the Default DIL number in the sip options?
The system will send that out as the cli if there is nothing in the cli table you specified for the extension you are dialing out from
|
|
|
|
|
Joined: Mar 2007
Posts: 44
Member
|
|
Member
Joined: Mar 2007
Posts: 44 |
Hi
The trace shows that it trys to authenticate with Voiceflexs servers by using the CLI i have set in table 1.
The default DIL number is the SIP account number, if this isnt in then the 7200 will not register with the SIP servers.
My SIP Server Settings are as follows:
Gateway Caller ID: 844****8
Default DIL Number: 844****8
Caller ID: ANI
Send CLI Table: 1
Incoming Mode: Follow DID Trans
Register Per User: Disable
Regist Trunk-GW Number: 844****8
Proxy Domain: sip.voiceflex.com
Gateway User ID: 844****8
I have tried alsorts of variations on the above and nothing allows me to send DDI numbers as CLI
|
|
|
|
|
Joined: Nov 2008
Posts: 1
Member
|
|
Member
Joined: Nov 2008
Posts: 1 |
Hi folks I would have to agree with the original poster on this. We have yet to find a way to change the CLI on a SIP trunk without it automatically changing the authentication name to the same value. As a workaround, note that Voiceflex allows you to set the CLI on the web-portal. The limitation is that you can only set one CLI for all calls over that trunk. We are working with Samsung to improve compatibility issues such as this one. Good luck! Regards, Richard PS: I would like to add that the registration process that I had to endure to post this reply is completely absurd, and the admins should consider revising it. -- Richard Brady VoIP Engineer Voiceflex t: +44 (0)207 4202 757 f: +44 (0)207 4401 817 w: www.voiceflex.com
|
|
|
|
Forums84
Topics94,515
Posts639,965
Members49,848
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
144
guests, and
30
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
