web statisticsweb stats Business Phone Systems Tech Talk Forum - VOIP & Cloud Phone Help

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Joined: Nov 2006
Posts: 21
Member
OP Offline
Member
Joined: Nov 2006
Posts: 21
We are testing VOIP service.

a provider has set us up with a DID and 3 Call paths for a SIP trunk.

We have configured IT 5.2.13 settings with all relevant information provided by the VOIP provider. Upon saving the config to our MCP based OS7200 (running 4.46d), the SIP Service Available option changes to Yes. at this point we can send and receive calls using the service without any problems.

After a certain amount of time (about 10-15 minutes), we suddenly lose the ability to receive inbound calls. Any inbound call gets an operator message that the call cannot be completed as dialed. Outbound calls can still be placed without issue.

Furthermore, if we enter IT 5.2.13 and Disable the service and then immediately reenable, we once again regain the ability to send and receive, until an additional 10-15 minutes has passed.

Has anyone encountered this before?

Is this a problem with the provider or with our configuration?

I am doing some additional testing to determine if the inability to receive calls only happens if no incoming calls are received or if it just strictly X amount of time from the initial connection.

Any insight would be greatly appreciated.

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: May 2010
Posts: 44
Member
Offline
Member
Joined: May 2010
Posts: 44
We have been having major issues with SIP on the 7030 and the 7200S, either dropping calls, service going unavailable, from our experience it depends on the SIP provider. Samsung Tech support has been of very little help. Who is the SIP provider?

Joined: Nov 2006
Posts: 21
Member
OP Offline
Member
Joined: Nov 2006
Posts: 21
The provider is Voxitas.

This problem has been narrowed down to approximately a 5 minute timeout. It only stops accepting inbound calls if an inbound call does not occur within 5 minutes.

Outside of this issue, we have not have problems with dropped calls, call quality, or service becoming unavailable.

Since the problem is no consistent, I feel it needs to be a configuration settings on our side or the side of Voxitas.

I have attempted to adjust all of the "timers" in 5.2.13 to be 250 (I assumed the times were in seconds making 250 be less than 5 minutes), however this has not hel[ped the situation.

I am hoping that touching base with Voxitas on Monday a solution will be reached if no one on this forum can suggest anything to correct the problem.

Joined: Mar 2010
Posts: 139
Member
Offline
Member
Joined: Mar 2010
Posts: 139
Might be worth a look with wireshark

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
Have you done the required port forwards in the router?

Specifically UDP 5060 to the MCP IP address.

Got your private/public settings correct for the MCP and MGI card?

Joined: Nov 2006
Posts: 21
Member
OP Offline
Member
Joined: Nov 2006
Posts: 21
Hi,

The problem was the port forwarding.

The firewall was automatically creating this PAT translation when the phone system initially registered, however, after the 5 minutes had past it would time out. Once a permanent static translation was entered, everything works as expected.

Joined: Jun 2006
Posts: 3,004
Likes: 4
Moderator-Samsung
*****
Offline
Moderator-Samsung
*****
Joined: Jun 2006
Posts: 3,004
Likes: 4
If its timing out after 5 mins, then in theory you could adjust your "trunk register time out" to be less then 5 mins.

But doing the port forward works definately


Moderated by  nameless, pvj 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,262
Posts638,696
Members49,757
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,098 Shoretel
187,708 CTX100 install
186,794 1a2 system
Newest Members
BPopilek, Rich F, LewisR, TDKs79, Buttinset
49,757 Registered Users
Top Posters(30 Days)
dexman 18
Toner 12
TDKs79 8
pvj 4
Who's Online Now
3 members (Curlycord, Yoda, Toner), 143 guests, and 239 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5