|
|
|
|
Joined: Mar 2010
Posts: 7
Member
|
|
Member
Joined: Mar 2010
Posts: 7 |
I have a Samsung DCS system with LCD 24B keysets. I receive a busy signal when selecting line 10 for an outside call. I have tried the steps to cancel callback without success. Any suggestions?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
You are dialing 9 for an outside line, getting a busy signal, then what are you doing, just hanging up or doing something else?
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Nov 2007
Posts: 492
Member
|
|
Member
Joined: Nov 2007
Posts: 492 |
MRL Equipment, we need more info. than that.
What does line 10 being busy have to do with the callback?
|
|
|
|
|
Joined: Mar 2010
Posts: 7
Member
|
|
Member
Joined: Mar 2010
Posts: 7 |
Our phone system has eleven outside lines. When I select individual lines 1 thru 9 and 11 I get a dial tone...as expected. When I select line 10, I get a busy signal and the LCD display reads "710: Busy CBK". I assume CBK stands for callback.
I would like information on how to free-up line 10.
|
|
|
|
|
Joined: Mar 2010
Posts: 139
Member
|
|
Member
Joined: Mar 2010
Posts: 139 |
That line or port is faulty you need to do some investigating.
|
|
|
|
|
Joined: Nov 2007
Posts: 492
Member
|
|
Member
Joined: Nov 2007
Posts: 492 |
I'm not super formiliar with the DCS.
A few ideas:
1. Is line 10's button red or showing busy on your phone? If so something is using that line. If not then you may have a line or port problem. Check to be sure there is dial tone going into CO port 10 on the system with a test set. If there is dial tone then disconnect it and then re-connect it to see if that clears the issue.
2. If not, you may need to reset the system by power it down waiting 15 seconds and then powering it back up.
3. Do you have a backup of the system programming? If not then I don't recommend #2.
4. Option 2 may clear the problem. If not, then you have a port or line problem.
If your not formiliar with what I'm talking about then you may want to contact a local tech. to check it out.
|
|
|
|
|
Joined: Jun 2007
Posts: 115
Member
|
|
Member
Joined: Jun 2007
Posts: 115 |
Try MMC40* for trunk release. Sounds like the trunk locked up
|
|
|
|
Forums84
Topics94,552
Posts640,109
Members49,861
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (nortelvoip),
1,323
guests, and
24
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
