|
|
|
|
Joined: Dec 2009
Posts: 78
Member
|
OP
Member
Joined: Dec 2009
Posts: 78 |
i have a 7200 v4.46d with IP phones working inside the network that work fine. NOw i need to set up phone outside of there network with NO vpn. So i have a remote IP phone that comes up but no audio at all. now with this software there is no setting in 840 to set to "public". so is there a new MMC with this setting or is there different ports to be opened on remote IP phones? thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 2,986 Likes: 4
Moderator-Samsung
|
|
Moderator-Samsung
Joined: Jun 2006
Posts: 2,986 Likes: 4 |
4.46d has removed the manual setting of public/private for IP Phones.
It now assumes that if the systme is configured with a public ip address and the phone is not within the same subnet as the MP card that it must use the public ip to get there.
You don't need to open anything on the phone side, but the usual MGI/MPS UDP ranges to the MGI/OAS card are required.
|
|
|
|
|
Joined: Dec 2009
Posts: 78
Member
|
|
OP
Member
Joined: Dec 2009
Posts: 78 |
the phones outside are configured to the public IP of the system. they come up but no audio still. we must have a port not opened on the router correctly :0. thanks
|
|
|
|
Forums84
Topics93,968
Posts637,416
Members49,704
| |
Most Online5,661
May 23rd, 2018
|
|
|
|
|
|
